Page 1 from 38
ESInstrucciones de montaje para el
sistema de transporte.
FInstructions de montage pour Basic
GBFitting Instructions for Basic Carrier
x 4x 4x 2x 2
x 4x 4x 4x 4
x 1x 1
Page 2 from 38
MAX lbsMAX lbs
CLS Class W219, 4dr Sedan 04- 10 EU
165165 CLS Class W219, 4dr Sedan 05- 10 ZA165165
CLS Class W219, 4dr Sedan 05- 10 US
165165 CLS Class W219, 4dr Sedan 05- 10 NZ165165
CLS Class W219, 4dr Sedan 05- 10 AU
165165 S Class W221, 4dr Sedan 06-+ ZA165165
S Class W221, 4dr Sedan 06-+ US
165165 S Class W221, 4dr Sedan 06-+ EU165165
S Class W221, 4dr Sedan 06-+ NZ
165165 S Class W221, 4dr Sedan 06-+ AU165165
Page 3 from 38
First Time Installation
Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
This kit fits type A, B, C and D.
These instructions show type A crossbar
fitted. They also apply to type B, C and D.
Use keys to remove covers.
Page 4 from 38
Use hex screwdriver to reverse adjusting
screw 10 turns.
Press adjusting screw and pull crossbar legs
out. Refer to the crossbar instructions for
Ensure each end of the crossbar is adjusted
Attaches to factory-fitted mounting points
Please check the rear of this manual for
information relating specifically to your
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
Page 5 from 38
Tighten adjusting screw to 5 Nm (3.7 ft lb).
Remove plastic clamp block by gripping bar
leg with fingers and push firmly with thumbs
until clamp block drops out behind leg.
Select plastic internal block (from fitting kit)
and insert into foot.