Page 6 from 6
Version 07.09.2010 TF-NTG2
3. Activation of the video-in-motion function
On vehicles with NTG 2/4/4.5 the video-in-motion function is activated permanently
without disturbing the navigation performance.
On vehicles with NTG 2.5 select the “navigation level” on the instrument
and press the “hang-up”-button on the steering-wheel for more than 3
seconds to activate/deactivate the video-in-motion function. When the
ignition is off, the video-in-motion interface will be automatically
Note: As long as the video-in-motion function is activated, the navigation
of the command will NOT be working!
Operation voltage 10.5 – 14.8V
Stand-by power drain >1mA
Operation power drain ~60mA
Power consumption ~0,72W
Temperature range -30°C bis +80°C
Measurements (box only) B x H x T 70 x 20 x 47 mm
5. Technical support
Worldwidesounds Unip. Lda
Rua Mons. Avelino Gonçalves 63
Phone: +351 965228688
Email: [email protected], [email protected]
Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered
trademarks ® of their corresponding legal owners.