Page 6 from 26
Page 7 from 26
1 Product Features
HP IPS LCD Monitor
The LCD (liquid crystal display) monitor has an active matrix, IPS (in-plane switching) panel. The
monitor features include:
●58.4 cm (23-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen
support for lower resolutions; includes custom scaling for maximum image size while preserving
original aspect ratio
●Non-glare panel with an LED backlight
●Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side
●Pivot capability to rotate display to portrait mode
●Swivel and height adjustment capabilities
●Removable stand for flexible monitor panel mounting solutions
●Video signal input to support VGA analog (cables are provided)
●Video signal input to support DVI digital (cables are provided)
●Video signal input to support DisplayPort digital (cables are provided)
●USB 2.0 hub with one upstream port (connects to the computer) and two downstream ports
(connects to USB devices)
●USB cable provided to connect the monitor's USB hub to the USB connector on the computer
●Supports an optional HP speaker bar
●Plug-and-play capability if supported by the computer system
●Privacy filter slots to insert filters (purchased separately) to block side screen viewing
●Security slot provision on rear of monitor for optional cable lock
●Cable management feature for placement of cables and cords
●On-Screen Display (OSD) adjustments in several languages for easy setup and screen
●HP Display Assistant for adjusting monitor settings and enabling theft deterrence features
●HDCP copy protection on DVI and DisplayPort inputs
●Software and documentation CD that includes monitor drivers and product documentation
●Energy saver feature to meet requirements for reduced power consumption
●Energy Star® qualified
HP IPS LCD Monitor 1
Page 8 from 26
●Intelligent Management AssetControl
●Compliant with the following regulated specifications (for additional certifications and agency
notices, refer to the HP LCD Monitors Reference Guide on the CD included with this monitor):
◦European Union CE Directives
◦Swedish TCO Requirements
2 Chapter 1 Product Features
Page 9 from 26
2 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Unfolding the Monitor Pedestal Base
1.Lift the monitor from its box and place it face down on a flat surface.
2.Hold down the monitor base with one hand (1) then grasp the top of the stand with the other
hand and unfold the display head 90 degrees (2).
CAUTION:Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
Figure 2-1 Unfolding the Monitor Pedestal Base
NOTE:When the monitor is unfolded for the first time, the display head is locked from adjusting to a
full-height position. To adjust the display head to full height, press down on the display head to unlock
it then pull up on the display head to raise it to the full-height position. Refer to step 3 in
Monitor on page 8.
Unfolding the Monitor Pedestal Base 3
Page 10 from 26
Figure 2-2 Rear Components
1 AC Power Connector Connects the AC power cord to the monitor.
2 DisplayPort Connects the DisplayPort cable to the monitor.
3 DVI-D Connects the DVI-D cable to the monitor.
4 VGA Connects the VGA cable to the monitor.
5 USB Upstream
ConnectorConnects the USB hub cable to the monitor's USB hub
connector and to a host USB port/hub.
6 USB Downstream
Connectors (2)Connects optional USB devices to the monitor.
4 Chapter 2 Setting Up the Monitor