Page 131 from 228
Replacing the Upper Cover
3.Replace the single securing screw.4.Press down on the adhesive strips to secure the
FFC in place.
1.Replace the Upper Cover as shown, front edge
first.2.Rotate the cover downward and press around the
edges, taking care not to force the cover closed.
3.Replace the single securing screw.
Page 132 from 228
4.Connect the four cables on the mainboard as shown.
Connect A as shown.
Connect B as shown and replace the securing latch.
Connect C as shown and replace the securing latch.Connect D as shown and replace the securing latch.
Page 133 from 228
5.Turn the computer over. Replace the sixteen screws on the bottom panel.
Replacing the LCD Module
1.Carefully align the LCD module over the hinge sockets and lower the module into the chassis.
2.Replace the four securing screws (two on each side) securing the LCD module.
Page 134 from 228
Replacing the WLAN Module
3.Connect the LCD cable as shown.4.Turn the computer over and replace the two
securing screws on the bottom of the chassis.
1.Insert the WLAN board into the mainboard socket
as shown.2.Replace the two securing screws.
Page 135 from 228
Replacing the WLAN Antenna and MIC Cables
1.Replace all the LCD cables (WLAN, 3G, and MIC)
in the right side housing well as shown.2.Run the WLAN cable (white) along the cable
channel using all available cable clips as shown.
3.Run the MIC cable along the cable channel as
shown, using all the available cable clips.4.Reconnect the MIC cable to the mainboard.
5.Run the WLAN cable (black) along the cable
channel using all available cable clips as shown.6.Reconnect the WLAN cables to the WLAN module
NOTE: The black cable terminates on the right
and the white cable on the left.