Page 81 from 228
Removing the WLAN Module
1.See “Removing the Keyboard” on page 65.
2.Disconnect the antenna cables from the WLAN module.
3.Move the antenna cables away and remove the two screws to release the WLAN module.
4.Detach the WLAN Module from the mainboard.
WLAN Module M2*3 2
Page 82 from 228
Removing the 3G Antenna
1.See “Removing the 3G Module” on page 56.
2.Remove the adhesive tape from the 3G cable as shown.
3.Gently pull the 3G cables through the chassis, as shown, until the cable terminals are free from the case.
Page 83 from 228
Removing the WLAN Antenna and MIC Cable
1.Disconnect the MIC cable from the mainboard.
2.Remove the MIC cable from the cable channel as shown.
3.Remove the adhesive tape on the WLAN cable
Page 84 from 228
4.Remove the Antenna Cables from the housing well as shown.
NOTE: Place the cables to one side to avoid damage.
5.Ensure all cables are free of the right side cable channel as shown.
Page 85 from 228
Removing the LCD Module
1.Remove the Battery Pack. See “Removing the Battery Pack” on page 50.
2.Remove the 3G Module. See “Removing the 3G Module” on page 56.
3.Remove the WLAN Module. See “Removing the WLAN Module” on page 71.
4.Remove the Antenna. See “Removing the 3G Antenna” on page 72.
5.Remove the two securing screws from the bottom of the chassis.
6.Turn the computer over. Disconnect the LCD cable from the top cover.
LCD Module M2*10 2