Page 51 from 228
BIOS Flash Utility
The BIOS flash memory update is required for the following conditions:
•New versions of system programs
•New features or options
•Restore a BIOS when it becomes corrupted.
Use the Phlash utility to update the system BIOS flash ROM.
NOTE: Create a Crisis Recovery Media (such as USB HDD) before you use the Phlash utility.
NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.
NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not
contain enough power to finish BIOS flash, the system will not boot as the BIOS is not loaded.
Perform the following steps to use the Flash Utility:
1.Press F2 during boot to enter the Setup Menu.
2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3.Execute the IFLASH.BAT batch file to update BIOS (Read xxxxx.fd to Memory).
Inform ation M ain A dvanc ed Intel S ec urityB ootExit
Item S pec ific Help
B oot priority order:
1: US B HDD: A B C HDDUse <
↑> or <
2: IDE 1: Optiarc DV D RW A D-7560S -(P M )s elec t a devic e, then
3: USB FDD:pres s < F6> to m ove it
4: P CI LA N: IB A GE S lot 00C8 v1300up the Lis t, or < F5>
5: IDE 0: W DC W D2500B E V S -22US T0-(P M )to move it down the
6: USB KEY:list. Press to
7: US B CD/DV D ROM :es c ape the m enu. P hoenix S ec ureCore(tm ) S etup Utility
Page 52 from 228
4.In flash BIOS, the message Please do not remove AC Power Source displays.
NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue.
5.Flash is complete when the following message displays.
6.Shutdown or reboot base on iflash.bat command.
Page 53 from 228
Remove HDD/BIOS Utility
This section provide you with removing HDD/BIOS method:
Remove HDD Password:
•If you key in wrong HDD password three times, Hdd password error code displays. See the image
To reset the HDD password, run HDD_PW.EXE as follows:
Key in hdd_pw 15494 0
3.Select one upper-case string from the list.
4.Reboot system and key in the selected string (0KJFN42 or UVEIQ96) on the HDD User
Page 54 from 228
Remove BIOS Password:
If you key in the wrong Supervisor Password three times, System Disabled displays on the screen. See the
To reset the BIOS password, run BIOS_PW.EXE as follows:
Key in bios_pw 14452 0
2.Select one string from the list.
Page 55 from 228
3.Reboot the system and key in the selected string (qjjg9vy, 07yqmjd etc.) for the BIOS user