Page 121 from 182
Replacing the Upper Cover
1.Startig with the reasr, align the upper cover with the lower cover, taking care to not force in place.
2.Connect the seven cables on the mainboard as shown. 4.While holding the mylar cover back with one hand,
replace the speaker cable in its housing.
5.Replace the mylar cover to secure the cable.6.Replace the two securing screws on the left
Page 122 from 182
11 2Chapter 3
Page 123 from 182
Chapter 311 3
3.Replace the five screws on the top panel.
4.Turn the computer over. Replace the nine screws on the bottom panel.
Replacing the LCD Module
1.Carefully align the LCD module over the hinge sockets and lower the module into the chassis.
2.Replace the four securing screws (two on each side) securing the LCD module.
Page 124 from 182
11 4Chapter 3
3.Connect the the LCD, MIC and back light cables.
4.Turn the computer over and replace the two securing screws on the bottom of the chassis.
Page 125 from 182
Chapter 311 5
Replacing the Antenna Cables
Ensure that the three Antenna cables pass through the Mainboard and are accessible from
the underside of lower cover.
1.Insert the Antenna Cables through the Upper
Cover. Make sure they are accessible from the
underside.2. Pull the cables through.
3. Secure the cables in place as shown. 4. Place the cabling in the wiring conduit as shown.