Page 116 from 182
Replacing the Modem Module
Replacing the USB Board
1.Angle the right side of the USB board into the lower base. Align the screw sockets and replace the two
2.Replace the cable on the USB board. 1.Replace the module from the lower base.2.Tighten the two (2) securing screws on the modem
3.Connect the modem cable as shown in the following images.
Page 117 from 182
Page 118 from 182
Replacing the Bluetooth Module
Replacing the Right Speaker Module
1.Position the module and insert in place.2.Connect the bluetooth cable as shown.
3.Replace the adhesive strip to cover the Bluetooth cable.
1.Replace the the speaker module as shown.2.Replace the two securing screws on the speaker
Page 119 from 182
Replacing the Launch Board
1.Replace the two securing screws on the Launch Board.
NOTE: The right hand securing screw is shared by the Power Board.
2.Connect the Launch Board cable to the mainboard.
Page 120 from 182
11 0Chapter 3
Replacing the Touch Pad Bracket
Replacing the Left Speaker Module
IMPORTANT:The Touch Pad cannot be removed individually. To replace the Touch Pad, replace the entire
1.Replace the Touch Pad bracket. 2. Replace back cover and the securing screw.
3. Connect the Touch Pad FFC to the Touch Pad board.
1.Replace the speaker module as shown.2.Grasp both ends of the mylar cover to expose the
3.Replace the speaker cable as shown.