Page 46 from 182
The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.
The table below describes the parameters in this screen.
Exit Saving Changes Exit System Setup and save your changes to CMOS.
ChangesExit utility without saving setup data to CMOS.
Load Setup Default Load default values for all SETUP item.
Discard Changes Load previous values from CMOS for all SETUP items.
Save Changes Save Setup Data to CMOS.
PhoenixBIOS Setup Utility
Information Main Advanced Security Power Boot AMDExit
Item Specific Help
Ex it Saving ChangesExit System Setup and
Ex it Dis c arding Changess ave y our c hanges t o
Load Set up Default sCMOS .
Dis c ard Changes
↑↓ Select Item F5/F6 Change Values F9 Set up Default s
←→ Select Menu Enter Select
XSub-Menu F10 Save and Ex it
Page 47 from 182
BIOS Flash Utility
The BIOS flash memory update is required for the following conditions:
•New versions of system programs
•New features or options
•Restore a BIOS when it becomes corrupted.
Use the Phlash utility to update the system BIOS flash ROM.
NOTE: Create a Crisis Recovery Media (such as USB HDD) before you use the Phlash utility.
NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.
NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not
contain enough power to finish BIOS flash, the system will not boot as the BIOS is not loaded.
Perform the following steps to use the Flash Utility:
1.Press F2 during boot to enter the Setup Menu.
2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3.Execute the JALB028.BAT batch file from C:\JALB0_JALC0\BIOS\JALB028A to update BIOS.
The flash process begins as shown.
Page 48 from 182
4.In flash BIOS, the message Please do not remove AC Power Source displays.
NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue.
5.Flash is complete when the message Flash programming complete displays.
Page 49 from 182
Removing HDD Passwords
This section provide you with removing HDD/BIOS password method:
Remove HDD Password:
•If you key in wrong HDD password for three time, “HDD password error code” would display on the
screen. See the image below.
•If you need to solve HDD password locked problem, you can run HDD_PW.EXE
Key in “hdd_pw 15494 0”
3.Choose one upper-case string
•Reboot system and key in “0KJFN42” or “UVEIQ96” to HDD user password.
Page 50 from 182