Page 56 from 132
Running Diagnostics Program
Insert CD-Disk and floppy disk then boot from floppy disk drive to BIOS re-flash.
2.Serial Port, Parallel Port and FDD Test
Insert SIO/PIO loopback to serial/parallel port. Place the diskette in the floppy diskette drive. Then run the test
3.CMOS RTC and FDD Test
Insert the diskette to the floppy disk drive for test.
Page 57 from 132
6.1394 ID Check
If you need to confirm whether the 1394GUID serial number has been input or not, you can run this utility.
Press^then Y key to next test.
Page 58 from 132
After you run the utility, please point and move your finger on the touchpad. Then see if the movement of the
cursor can reach to left top (X=0, Y=0). Press the right and left button then continue next test.
8.VGA R.G.B. Mode Test
Inspects red, green and blue color of display quality. Press any key to continue next test.
Page 59 from 132
9.FA N Te s t
Check if the fan has turned on or not. You can confirm the function by a feather.
Press all keys according to this order--from left to right and from up to down to test each key’s function. If pass
then press b + Break to continue the next test.
11 .32bit Systemcard Test
Insert two pieces of Syscard (Card bus) into PCMCIA slots for test.
Page 60 from 132
Test the left channel first. After you hear a sound presseto test the right channel.
13.Battery Charge Test
Plug in AC adapter to the system for test.