Page 41 from 135
Acer eNet Management
Acer eNet Management helps you to quickly and easily connect to both wired and wireless networks in a
variety of locations. To access this utility, either click on the “Acer eNet Management” icon on your notebook,
or start the program from the Start menu. You also have the option to set Acer eNet Management to start
automatically when you boot up your PC.
Acer eNet Management automatically detects the best settings for a new location, while offering you the
freedom to manually adjust the settings to match your needs, simply by right-clicking on the icon in the taskbar.
Acer eNet Management can save network settings for a location to a profile, and automatically apply the
appropriate profile when you move from one location to another. Settings stored include network connection
Page 42 from 135
settings(IP and DNS settings, wireless AP details, etc.), as well as default printer settings. Security and safety
concerns mean that Acer eNet Management does not store username and password information.
Acer ePower Management
Acer ePower Management features a straightforward user interface. To launch it, select Acer ePower
Management from the Empowering Technology interface, or double-click the Acer ePower Management icon
in the task tray.
The default setting is “Maximum Performance.” You can adjust CPU speed, LCD brightness and other
settings, or click on buttons to turn the following functions on/off: Wireless LAN, Bluetooth, CardBus, Memory
Card, Audio, and Wired LAN.
To suit your usage, there are four pre-defined profiles - Entertainment, Presentation, Word Processing, and
Maximum Battery. Or, you can define up to three of your own profiles.
Create new power scheme
1.Assign a name for the new scheme.
2.Choose existing scheme to use as a template.
3.Select whether used for mains (AC) or batery mode.
4.Choose which power options best fit your needs, then click OK.
5.The new profile will appear on the main screen.
For real-time battery life estimates based on current usage, referto the panel on the lower left-hand side of the
Page 43 from 135
You can also click “Advanced Settings” to:
TRe-load factory defaults.
TSelect what actions will be taken when the cover is closed, and set passwords for accessing the system
after Hibernation or Standby.
TView information about Acer ePower Management.
Page 44 from 135
Acer ePresentation Management
Acer ePresentation Management lets you select from two of the most common projector resolutions: XGA and
Page 45 from 135
Hardware Specifications and Configurations
System Board Major Chips Processor
® Pentium® M YonahProcessor dual core at 1.66~2.33 GHz or higher
® Pentium® M Yonah Processor single core at 1.66~1.83 GHz higher
® Celeron® M Yonah Processosr 430/420/410
CPU package uFCPGA
CPU core voltage Depend on DVI
CPU I/O voltage 1.2V
System core logic
Super I/O controller SIO 1000, LPC interface
Audio controller Azalia Audio Controller ALC883
Video controller ATI M56P/54P/52P
Hard disk drive controller ICH7M
Keyboard controller NS PC97541V
IrDA controller SMSC SIO 1000
DVI controller CH7307
PCMCIA/ card reader / 1394
DDR-soDIMM controller 945PM/945GM
BIOS vendor Phoenix
BIOS Version Phoenix First BIOS
BIOS ROM type Flash ROM
BIOS ROM size 512KB
BIOS package 32 lead of TSSOP
BIOS password control Set by setup manual
Cache controller Built-in CPU
Cache size 2 MB
1st level cache control Always enabled
2nd level cache control Always enabled
Cache scheme control Always enabled