Page 86 from 135
14.Disconnect the LCD cable and remove the LCD cable from the LCD panel.
15.This completes the LCD module disassembly.
Remove the CCD module
1.Remove the five screws securing the CCD brackets and remove the CCD brackets
2.Lift the CCD plastic bracket up.
3.Remove the CCD module.
4.Be careful that the CCD cable is combined with the antenna.
Page 87 from 135
Reassembling the LCD Module
1.Connect the LCD cable to the LCD panel.
2.Place the tape on the LCD cable.
3.Place the right LCD bracket back to the LCD panel
4.Secure the right LCD bracket with the two screws.
5.Place the left LCD bracket back to the LCD panel
6.Secure the left LCD bracket with the two screws.
7.Place the LCD panel back to the LCD cover.
8.Place the inverter board back to the LCD module and connect the inverter cables to the inverter board.
9.Secure the LCD panel with the 13 screws.
Page 88 from 135
10.Place the LCD bezel back to the LCD module. Push each side of the bezel to make it clip to the LCD
11 .Secure the LCD bezel with four screws.
12.Place the four screw caps back.
13.This completes the LCD module reassembly.
Page 89 from 135
HDD disassembly & Reassembly
1.Remove the four screws securing the HDD bracket.
2.Remove the HDD bracket from the HDD.
3.Place the HDD bracket back to the HDD.
4.Secure the HDD with the four screws.
5.This completes HDD module disassembly and reassembly.
Page 90 from 135
ODD disassembly & Reassembly
1.Remove the four screws securing the ODD module.
2.Remove the ODD bracket from the ODD.
3.Place the ODD bracket back to the ODD.
4.Secure the ODD with the four screw.
5.This completes ODD module disassembly and reassembly.