Page 81 from 135
Remove the Mainboard
1.Disconnect the speaker cable from the mainboard.
2.Remove the screw securing the MDC board.
3.Remove the MDC board from the mainboard.
4.Disconnec the MDC cable from the MDC board.
5.Unlatch the latch and disconnect the USB FFC from the mainboard.
6.Remove the screw securing the USB module.
7.Remove the screw securing the USB module.
Page 82 from 135
8.Remove the USB module from the lower case.
9.Unlatch the latch and disconnect the USB FFC from the USB module.
10.Remove the PCMCIA dummy card from the lower case.
11 .Remove the mainboard from the lower case.
12.This completes the main unit disassembly.
NOTE: For models with CIR board and DVI-D port, please refer to following steps.
1.Use hex screw driver to release the two screw on the rear panel.
Page 83 from 135
2.Release the screw securing the CIR board and remove the mainboard from the lower case.
3.Disconnect the CIR cable from the CIR board to separate the CIR board and mainboard.
4.Remove the two screws securing the TV board.
5.Remove the TV board from the lower case.
6.This completes the main unit disassembly.
Page 84 from 135
Disassembling the LCD Module
1.Remove the four screw caps from the LCD module.
2.Remove the four screw securing the LCD bezel.
NOTE: For LCD module with CCD, please refer to following steps.
1.Remove the six screw caps for the LCD module.
2.Remove the six screws securing the LCD module.
3.Remove the LCD bezel.
4.Remove the 13 screws securing the LCD panel.
Page 85 from 135
5.For LCD with CCD, remove the 11 screws securing the LCD panel.
6.Lift up the inverter board.
7.DIsconnect the inverter cables from the inverter board and remove the inverter board.
8.Remove the LCD panel from the LCD cover.
9.Remove the two screws securing the left LCD brackets.
10.Remove the left LCD bracket from the LCD panel.
11 .Remove the two screws securing the right LCD bracket.
12.Remove the right LCD bracket from the LCD panel.
13.Remove the tape on the LCD cable.