Page 71 from 135
Removing the TV Tuner, Heatsink Module, CPU, and HDD
Remove the Heatsink Cover
1.Release the six screws securing the heatsink cover. (The six screws are attached to the heatsink cover)
2.Lift the heatsink cover up and remove it.
Remove the TV Tuner Card(for selected models)
1.Disconnect the TV tuner cable and antenna from the TV tuner card.
2.Press the left and right latch to release the TV tuner card.
3.Disconnect the TV tuner cable and antenna from the TV board.
Remove the Heatsink Module
1.Disconnect the main fan cable from the mainboard.
2.Remove the seven screws securing the heatsink module.
Page 72 from 135
3.Remove the heatsink module from the main unit.
Removing the HDD Module
1.Release the two screws securing the HDD cover. (One screw is attached to the HDD cover)
2.Remove the HDD cover.
3.Remove the screw securing the HDD.
4.Holding the mylar and pull the HDD module out of the main unit.
Removing the CPU
1.Use a flat screw driver and turn the screwdriver counterclockwise to unlock the CPU.
2.Remove the CPU from the mainboard.
Page 73 from 135
Page 74 from 135
Removing the Memory and Wireless Card
Remove the Memory
1.Press the latch on left and right side to pop out the memory and remove it.
2.Remove the other memory.
Removing the Wireless Card
1.Disconnect the wireless antenna from the wireless card.
2.Remove the two screws securing the wireless card.
3.Remove the wireless card from the mainboard.
Page 75 from 135
Removing the Bluetooth Module
1.Remove the screw securing the Bluetooth module.
2.Remove the Bluetooth connector from the mainboard.
3.Remove the Bluetooth cable from the Bluetooth wire groove.
4.Remove the Bluetooth module from the main unit.
5.Remove the two screws securing the Bluetooth bracket.
6.Remove the Bluetooth module from the Bluetooth bracket.
7.Disconnect the Bluetooth cable from the Bluetooth module.