Page 1 from 30
Acer LCD Monitor
Page 2 from 30
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or change s. Such changes will be incorporated in new
editions of this manual or supplementary documents and publ ications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
Record the model number, serial number, purch ase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, sto red in a retrieval system, or transmitted, in
any form or by any means, electronically, mechan ically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________ Copyright © 201 3. Acer Incorporated.
All Rights Reserved.
Acer LCD Monitor User's Guide
nal Issue: 09/20
Acer LCD Monitor User's Guide
Acer and the Acer logo are re gistered trademarks
of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies. 13
Page 3 from 30
Special notes on LCD monitors
The following are normal with the LCD m
onitor and do not indicate a problem.
•Due to the nature of the fluorescen
t, the screen may flicker during
initial use. Turn off the power switch and then turn it on again to make
sure the flicker disappears.
•You may find slightly uneven b r
ightness on the screen depending on the
desktop pattern you use.
•The LCD screen has 99.99% or more effective p ixe
ls. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all the time.
•Due to the nature of the LCD screen, an afterimage of the previous screen
in after switching the image, when the same image is displayed
for hours. In this case, the screen is recovered slowly by changing the image
or turning off the power switch for a few hours.
Information for your safety and
Read these instructions caref u
this document for future reference.
Follow all warnings and instruct ions marked on the product.
Cleaning your monitor
Please carefully follow these guidelines wh
en cleaning the monitor:
•Always unplug the moni
•Use a soft cloth to wipe the scr
een and cabin
et front and sides.
Connecting/disconnecting the device
Observe the following guidelines when con
necting and disconnecting power
from the LCD monitor:
•Make sure the monitor is attached to its base before co nn
ecting the power
cord to the AC power outlet.
•Make sure both the LCD monitor and t h
e computer are turned off before
connecting any cable or unplugging the power cord.
•If the system has multiple sources o
f power, disconnect power from the
system by unplugging all powe r cords from the power supplies.
Page 4 from 30
Be sure that the power outlet you plug the power cord into is easily accessible
and locat ed
as close to the equipment operator as possible. When you need to
disconnect power from the equipment, be sure to unplug the power cord from
the electrical outlet.
To protect your hearing, follow these instructions.
•Gradually increase the volume until you can hear it clearly and comfortably
and without distortion.
•After setting the volume level, do not increase it after your ears have
•Limit the amount of time listeni ng to music at high volume.
•Avoid turning up the volume to block out noisy surroundings.
•Turn the volume down if you can't hear people speaking near you.
•Do not use this product near water.
•Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•Slots and openings are provided fo r ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.
•Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage po ints or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
•To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
•Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage internal
Using electrical power
•This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
•If an extension cord is used with this product, make sure that the total
Y Your device uses one of the following power supplies:Object/
Part No. Trademark Model
DELTA ADP-65VH D
Page 5 from 30
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
•Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used , the load should not exceed 80% of
the power strip's input rating.
•This product's power cord is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the power cord plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grou nded may result in electric shock
Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.
•Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.5
meters (15 feet) maximum length.
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
•the power cord or plug is damaged, cut or frayed
•liquid was spilled into the product
•the product was exposed to rain or water
•the product has been dropped or the case has been damaged
•the product exhibits a distinct change in performance, indicating a need
•the product does not operate normally after following the operating