Page 121 from 180
4.Replace the two screws to secure the TouchPad Bracket to the Upper Cover.
5.Connect the two FFCs to the Button Board and close the locking latches as shown.
Replacing the Upper Cover
1.Place the Upper Cover into the Lower Cover left corner first. Hook the hinge cover part of the upper cover
around the left hinge, making sure the LVDS cable passes through the opening in the upper cover, then
rotate the cover until it is aligned with the lower cover.
Page 122 from 180
11 2Chapter 3
2.Lightly press the edges of the cover in place to connect it to the lower cover.,
3.Replace the eight securing screws to the Upper Cover.
(red callout)M2*4 8
Page 123 from 180
Chapter 311 3
4.Connect the following cable to the Mainboard.
5.Connect the FFC and close the locking latch as shown.
Page 124 from 180
11 4Chapter 3
6.Turn the computer and replace the eleven screws securing the Upper Cover to the Lower Cover.
Removing the Hinge Covers
1.Connect the Hinge Covers to the Upper Cover as shown.
(Red callouts)M2*6 7
(Cyan callouts)M2*4 4
Page 125 from 180
Chapter 311 5
2.Replace the two screws to secure the hinge covers.
Replacing the Keyboard
1.Turn the computer rightside up and open the lid to the full extent.
2.Holding the keyboard on edge, insert the Keyboard FFC and secure the latch as shown.
Hinge Cover M2*10 2