Page 111 from 180
Replacing the LAN Board
1.Connect the FFC cable to the LAN Board by pushing the cable into the connector shown.
NOTE: The FFC Cable connector to the LAN board does not have a locking latch.
2.If the LVDS cable is still connected, lift the adhesive strip securing the LVDS cable in place and disconnect
the cable from the Mainboard.
3.Insert the LAN Board into the Lower Cover as shown.
Page 112 from 180
4.Connect the LAN Board cable to the Mainboard and close the FFC locking latch.
5.Connect the LVDS cable to the Mainboard and adhire the adhesive strip to secure the LVDS cable in
Replacing the VGA Board
1.Connect the cable from the VGA Board and flip the board over.
Page 113 from 180
2.Insert the CRT Board left side first into the Lower Cover.
3.Replace the single screw to secure the VGA Board to the Lower Cover.
CRT Board M2*3 1
Page 114 from 180
Replacing the Speaker Module
1.Insert the Speaker cable into the cable channel. Ensure that the cable passes through all cable clips.
2.Place the right and left side speakers into the Lower Cover as shown.
Page 115 from 180
3.Replace the three screws to secure the Speakers to the Lower Cover.
4.Connect the Speaker cable to the Mainboard.
Speaker Module M2*3 3