Page 61 from 180
6.Disconnect the FFC and remove the Keyboard.
Page 62 from 180
Removing the Hinge Covers
1.See “Removing the Battery Pack” on page 38.
2.Remove the two screws securing the hinge covers.
3.Pull the Hinge Covers away from the Upper Cover as shown.
Hinge Cover M2*10 2
Page 63 from 180
Removing the Upper Cover
1.See “Removing the Hinge Covers” on page 52.
2.Remove the 11 screws securing the Upper Cover to the Lower Cover.
3.Turn the computer over and disconnect the following cable from the Mainboard.
(Red callouts)M2*6 7
(Cyan callouts)M2*4 4
Page 64 from 180
Release the locking latch and disconnect the FFC as shown.
4.Remove the eight securing screws from the Upper Cover.
(red callout)M2*4 8
Page 65 from 180
5.Starting at the front the cover, pry apart the Upper and Lower Covers as shown.
6.Working along the front and to the right, pry apart the covers as shown.
7.Lift the upper cover up and rotate it leftwards along the left hinge until the hinge is cleared, then lift the