Page 66 from 116
A SCW HEX NYL I#R-40/O#4-40 L5.5 34.00015.081
B SCREW MACH WAFER M2*L4 NI 86.00059.220 (PC Card slot
C CPU SCREW M2.5*4.3L (2.3 KG) 86.00D01.230
D CPU SCREW M2.5*4.3L (1.55 KG) 86.00D02.230
E SCREW M2.5-6 86.9A323.6R0
F SCRW M2.5*L8(NON NYLOK) 86.9A323.8R0
G SCREW M2*3 NYLON 1JMCPC-420325 86.9A352.3R0
H SCREW 86.9A352.4R0
I SCREW M2.5*4L(NYLOCK)BLACK ZN 86.9A353.4R0
J SCREW M2.5X6 86.9A353.6R0
K SRW M2.5*8L B/ZN NYLOK 700 86.9A353.8R0
L SCRW M2.5*L3(NON NYLOK) 86.9A523.3R0
M SCREW M3x4(86.9A524.4R0) 86.9A524.4R0
N SCREW WAFER NYLOK NI 2ML3 86.9A552.3R0
O SCRW M2*4 WAFER NI 86.9A552.4R0
P SCRW M2.5*3 WAFER NI 86.9A553.3R0
4 screw caps
J*4 for 15"
J*8 for 15.4"
Page 67 from 116
Removing the Battery Pack
1.Unlock the battery lock.
2.Slide the battery latch then remove the battery.
Page 68 from 116
Removing the Wireless LAN Card/the HDD Module/the Memory/the
ODD Module and the LCD Module
Removing the Memory and the HDD Module
1.Remove the five screws fastening the DIMM cover.
2.Detach the DIMM cover carefully.
3.Pop out the memory carefully.
4.Disconnect wireless main and auxiliary antenna from the wireless LAN card.
5.Pop out the wireless LAN card and remove it.
6.Remove the three screwss fastening the HDD cover.
7.Detach the HDD cover from the main unit.
8.Remove the four screws fastening the HDD module.
9.Then detach the HDD module carefully.
Page 69 from 116
Removing the ODD Module
1.First, remove the screw fastening the ODD module as shown.
2.Push the ODD module outwards then remove it.
Removing the LCD Module
1.Detach the middle cover from the main uiit carefully.
2.Disconnect the launch board FFC from the launch board.
3.Remove the middle cover (with launch board and microphone) from the main unit.
4.Disconnect the microphone cable from the launch board.
Page 70 from 116
5.Take out the microphone from the middle cover.
6.Remove the two screws fastening the launch board.
7.Then remove the launch board from the middle cover.
8.Remove the screw holding the keyboard.
9.Turn over the keyboard as shown.
10.Disconnect the keyboard cable.
11 .Remove the keyboard from the main unit.
12.Tear off the tapes fastening the wireless antenna cable.
13.Pull the antenna set from the main unit.
14.Disconnect the LCD cable.
15.Turn over the notebook then remove two screws fastening the LCD module.