Page 6 from 6
14. REMOVE THE BOLT AND NUT CONNECTING THE STRUT ASSEMBLY TO THE LOWER SUSPENSION ARM.
15. LOOSEN THE LOWER CONTROL ARM BOLT SLIGHTLY, DO NOT REMOVE (THIS WILL ALLOW THE LOWER CONTROL
ARM TO SWING DOWN). (FIGURE K)
16. REMOVE STRUT ASSEMBLY FROM CAR.
17. STRUT REMOVAL COMPLETE.
ABC STRUT INSTALLATION
1. INSTALLATION IS IN REVERSE ORDER OF ABC STRUT REMOVAL.
Tighten all nuts and bolts to manufacturer's specifications during the \
Please refer to your vehicle manufacturer's service manual for re-pressu\
rizing the ABC® hydraulic suspension system.
Work is to be performed by a factory trained mechanic; failure to do so m\
ay cause damge to the vehicle. Diagnostic
software is required to re-pressurize the hydraulic system after strut i\
REV 2 02/12/2013SK-2457
REAR LEFT ABC STRUT FOR
2000-2006 MERCEDES-BENZ S-CLASS
2000-2006 MERCEDES-BENZ CL-CLASS